What Is the Concept of an Aircon Overhaul?
The air conditioning overhaul revolves around removing deep panels, thoroughly cleaning an air conditioning unit, and fixing any damaged micro components. However, it should be noted that an air conditioning overhaul is not the same as general maintenance. To ensure a professional and dependable carrier for your air conditioner wishes, visit https://www.airconservicing.org/.
Why is an air conditioning overhaul a requirement?
With the passage of time, heating and cooling systems are forced to wrestle with dirt, dust, and grease. In essence, you can tell if your unit is in dire straits and needs an overhaul if:
- The air-conditioned is struggling to cool the room
- Strange sounds come out of the system.
- There’s water leaking by the side of the unit.
- The air-conditioner emits some foul smell while in use.
- And lastly, the electricity bill is getting costlier.
If these signs are ignored, the price of repair work will increase abnormally, or the entire air conditioning system will be replaced.
What Is the Procedure for Reassembling an Air Conditioning Unit?
A step-by-step process followed during the cabinetry rebuilds.
The Air Conditioning Unit needs to be Taken Apart
The first step of an aircon overhaul is to coach the unit to be disassembled. This will allow the mechanic to access the inner parts of the unit, which include the compressor, blower wheel, and evaporator.
Each unit being taken apart needs to be meticulously cleaned
In the first cleaning stage, all pieces that have been taken apart are washed with specialized tools and cleaning agents, in which case each detailed remnant is cleaned. Notable clean units during the process would take away:
- Evaporator Coils: Any filament remnants are cleaned up for the seamless heat exchange.
- Blower Wheel: Any debris that builds up on the blower wheel is removed so air can flow smoothly.
- Drainage System: Any clogs in the drainage pipes are cleared to stop leaks from forming.
- Fan Blades and Filters: Dust and other particulates are removed to maintain air quality.
Components Wear and tear Examination
After the maintenance work, the unit is disassembled, and components undergo inspection for wear and tear. Common issues identified during this stage include:
- The bearings have worn out
- Wires are damaged
- Coils show signs of rust
- Deteriorated or broken parts
All damaged and/or worn-out components are replaced to avert further malfunctions.
The Phase of Recombination of the Unit
After all parts are cleaned and checked, the unit is assembled back together with the required care. This stage is crucial as it determines that the unit will be reconstructed properly and that all the parts will operate correctly.
Testing and calibration
Once the assembly is completed, the technician rechecks the air conditioning unit to ensure its operational effectiveness. These activities include:
- Test for adequate cooling
- Confirm that no strange sounds or vibrations are present
- Check if the thermostat and controls are working as intended
- Check the refrigerant lines for any leakages
Advantages of Aircon Overhaul
There are many advantages to aircon overhaul, such as;
- Increased Cooling Performance: Units installed with new and better components keep enhancing the unit’s cooling.
- Better Air Quality: Cleaning Mold, dust, and bacteria helps improve the indoor health of the people breathing inside the room.
- Decreased Electricity Expenses: A well-functioning unit requires less electrical power, reducing the total energy consumption cost.
- Increased Durability: Regular Overhauls mean less wear and tear, which means that your air conditioner will last a longer time.
- Reduced Maintenance Cost: Preventive Maintenance is cheaper than repairs when units get damaged later.
